manualshive.com logo in svg

Paradyne COMSPHERE 6800 Series, Command Reference Manual

The Paradyne COMSPHERE 6800 Series is a cutting-edge telecommunications product designed to revolutionize connectivity. Our comprehensive manual provides step-by-step Installation and Enabling/Disabling Instructions, allowing users to seamlessly set up and configure the device. Download this manual for free from our website to unlock the full potential of your Paradyne COMSPHERE 6800 Series.

Share
Download
background image

1-1

6800-A2-GB31-20

January 1997

1

Introduction

Overview

1-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

6800 Series NMS Communications Products

1-2

. . . . . . . . . . . . . . . . . . . . . . 

NMS-Supported APL Modems

1-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

NMS-Supported Direct Distance Dialing (DDD) Modems

1-2

. . . . . . . . . 

NMS-Supported Data Service Units (DSUs)

1-3

. . . . . . . . . . . . . . . . . . . . 

Paradyne APL Modems and DSUs 

(via ANALYSIS Gateway)

1-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Naming Conventions

1-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Device Addressing.

1-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Command Support – Customer Configurations

1-4

. . . . . . . . . . . . . . . . . . . . 

Command Access

1-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Shortcut for Command Access

1-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Wildcard Characters

1-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Multiple Entries

1-5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Format for Documenting Commands in this Manual

1-6

. . . . . . . . . . . . . . . . . . . 

Command Input Forms

1-8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Required Fields

1-8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Optional Fields

1-8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Display-only Fields

1-9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Carried-over Fields

1-9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Common Fields on Input Forms – Destination for results and 

Schedule execution

1-9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Results Forms

1-12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Help

1-13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

In Menu

1-13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

In Forms

1-13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

For Screen Input Fields

1-14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Overview

This manual describes the communications product commands that are used to manage various
modem types and Data Service Units (DSUs).

This chapter provides information on using the 6800 Series Network Management System
(referred to as NMS in this document) and accessing the modem/DSU commands. It also provides
a description of the command format used in this manual to document each command. It includes
instructions on entering abbreviated versions of options and wildcard characters when specifying
command execution parameters. The common fields (Destination for results and Schedule
execution) in the command input forms are defined in detail to eliminate the repetition of this
information for each command.

The modem/DSU commands can be used with the COMSPHERE

 and DATAPHONE

 II data

products. You access these commands under Network Control in the Manager task. The Trending
Reports and call statistics reports commands can also be accessed from the Performance Reports
task. Functionally, the commands under the Performance Reports task operate the same as those
commands of the same name under Network Control in the Manager task.

1

Summary of Contents for COMSPHERE 6800 Series














































































































































































































































Reviews:

No comments

Related manuals for COMSPHERE 6800 Series

Radyne DMD2401 LB Installation And Operation Manual preview
DMD2401 LB
Brand: Radyne Pages: 179
Patton electronics 1088/I User Manual preview
1088/I
Brand: Patton electronics Pages: 13
KWorld DVB-T 323U Faq preview
DVB-T 323U
Brand: KWorld Pages: 21
upcom HPO-V35 User Manual preview
HPO-V35
Brand: upcom Pages: 13
TP-Link TD-W8960N Installation Manual preview
TD-W8960N
Brand: TP-Link Pages: 24
Eicon Networks DIVA T/A ISDN Modem User Manual preview
DIVA T/A ISDN Modem
Brand: Eicon Networks Pages: 146
Etisalat iModem Manual preview
iModem
Brand: Etisalat Pages: 30
Adeunis RF ARF53 User Manual preview
ARF53
Brand: Adeunis RF Pages: 25
Adeunis RF ARF169 User Manual preview
ARF169
Brand: Adeunis RF Pages: 40
Adeunis RF ARF 73 User Manual preview
ARF 73
Brand: Adeunis RF Pages: 77
Rosewill RNX-56USB Quick Installation Manual preview
RNX-56USB
Brand: Rosewill Pages: 15
Yahoo! BB Trio Modem 26M Setup Manual preview
BB Trio Modem 26M
Brand: Yahoo! Pages: 6
NETGEAR cg3000-2staus User Manual preview
cg3000-2staus
Brand: NETGEAR Pages: 2
Hughes Network Systems HN9000 Installation Manual preview
HN9000
Brand: Hughes Network Systems Pages: 154
M-Life ML0700 Owner'S Manual preview
ML0700
Brand: M-Life Pages: 52
Xircom OP-720-69001 - Xircom RealPort CardBus Ethernet 10/100 User Manual preview
OP-720-69001 - Xircom RealPort CardBus Ethernet 10/100
Brand: Xircom Pages: 36
Hughes JUPITER System HT2000 User Manual preview
JUPITER System HT2000
Brand: Hughes Pages: 31
NETGEAR DG834N Specifications preview
DG834N
Brand: NETGEAR Pages: 2

Brands by name

Popular brands

Load more brands