Displaying System Information
4-14
9621-A2-GB20-30
August 1997
PVC Connection Status
PVC connection statuses are selected from the Status menu. Only PVC
connections with Source DLCIs configured to be Active are shown.
Follow this menu sequence:
Main Menu
→
Status
→
PVC Connection Status
Field
Status
What It Indicates
—
No PVC Connections.
PVC connections have yet to be
defined.
Source Link,
Primary Destination
Link, and
Alternate Destination
Link
Network
Port-1
Port-2
BRI
Mgmt Link
name
Identifies the cross-connection of
DLCIs configured for the access
unit.
Network – DDS network
Port – Port-1 or Port-2
BRI – B channel 1
Mgmt Link – PVC is a
management link that terminates
in the access unit;
name is set up
from Management PVCs Options
( Path: main/configuration/
management/pvc/entry).
Source DLCI,
Primary Destination
DLCI, and
Alternate Destination
DLCI
16 to 1007
Identifies the DLCI number for a
frame relay interface once the
source or destination link has been
selected.
Source EDLCI,
Primary Destination
EDLCI, and
Alternate Destination
EDLCI
0 to 62
For multiplexed DLCIs only.
Identifies an individual link/
connection embedded within a
DLCI.
Status
1
Active
2
Inactive
Identifies whether the physical
interfaces, LMIs, and DLCIs are all
enabled and active for this PVC
connection.
1
If the alternate destination status is Active, BRI-B1 appears; if Inactive, BRI appears.
2
For the circuit to be active, both Network and Config Statuses must be Active.
