User Interface
2-7
9621-A2-GB20-30
August 1997
Using the Interface
This section leads you through the basic operations of using the interface.
Selecting from a Menu
You select from a menu to get subsequent menus or screens so you can perform
desired tasks.
Procedure
To make a menu selection:
1. Tab or press the arrow keys to position the cursor on a menu selection. Each
menu selection is highlighted as you press the key to move the cursor from
position to position.
2. Press Return. The selected menu or screen appears.
3. Continue Steps 1 and 2 until you reach the screen you want.
Refer to the
Quick Reference to guide you through menu selections.
Selecting a Field
Once you reach the desired menu or screen, select a field to view, change, or
issue a command. Press the Tab or right arrow key to select a field within a
menu. The current setting or value appears to the right of the field.
Example:
To change the amount of time that a test will run before it is stopped from
10 minutes to 15 minutes:
Main Menu
→
Configuration
→
Load Configuration From:
→
Current
Configuration
→
General, Tab to the Test Duration (min) field,
enter
15, then press Return.
Example:
Selecting Control from the Main Menu, selecting Administer Logins, then entering
or changing security information.
Main Menu
→
Control
→
Administer Logins
→
[New/Delete]
