Displaying System Information
4-9
9621-A2-GB20-30
August 1997
Self-Test Results Messages:
These self-test result messages appear in the middle column of the System and
Test Status screen.
Message
What It Indicates
What To Do
Device Fail
One or more of the access
unit’s integrated circuit
chips has failed
device-level testing.
1. Reset the access unit and try
again.
2. Call your service
representative for assistance.
3. Return the access unit to the
front of this guide).
Memory Fail
Access unit failed memory
verification.
1. Reset the unit and try again.
1
2. Call your service
representative for assistance.
3. Return the access unit to the
front of this guide).
Passed
Access unit has been
plugged in (or reset ), the
access unit has passed the
diagnostic test, and there
are no other status
messages.
No action needed; no problems
were found during power-up or
reset.
1
Record the failure code before resetting the access unit; otherwise, the error
information will be lost.
