background image

Getting Started

Before installing or starting to use the FrameSaver NP, you should:

Install the User’s Manual - Installation Guide so that you can access all the 
installation, configuration, and operating information about the unit.

Print sections you may want to reference.

User’s Manual - Installation Guide

The manual is in PDF file format. Your PC should be using Microsoft Windows 3.1 or 
above, and have Adobe Acrobat Reader installed for browsing or printing this manual.

Adobe Acrobat Reader may be obtained free from Adobe Systems Incorporated, from 
their Web Site at www.adobe.com.

Using Adobe Acrobat Reader

Adobe Acrobat Reader is used just as you would most word processing or text editing 
programs. Start Adobe Acrobat Reader and open the file containing the FrameSaver 
NP User’s Manual - Installation Guide
. You can simply scroll through the pages, or 
use the Bookmarks along the left side to move around the manual or the tables in the 
front of the manual.

To print the manual or a selection of pages, select Print... from the File menu and then 
select the range of pages you wish to print. Select OK to begin printing.

Ordering a Hard Copy of the User’s Manual

Contact Paradyne Corporation at the address on the back of this Guide to obtain a print-
ed copy of a FrameSaver NP User’s Manual - Installation Guide. Always specify the 
“latest revision” for each publication number:

Safety Instructions

Before proceeding with the installation, carefully read the Equipment Interference No-
tice, Important Safety Instructions and Preface sections of the FrameSaver NP User’s 
Manual - Installation Guide
.

Contact your service representative, distributor or sales representative to order cables.

FrameSaver NP 110 Cable List

Description

 Part No.

T1 or DSX network cable, RJ-48, twisted pair

135-982-0006

Dial Line (POTS) cable, RJ-11 connector

135-007-7200

ISDN BRI network cable, RJ-49 connector

135-981-0006

Console cable (to AUX2), DB-9 connector

135-000-0464

Console cable (to AUX2), DB-25 connector

135-007-0400

AUX Port to router console port cable, DB-25 connector

135-008-0400

AUX Port to Cisco router console port, RJ-45 type connector

135-990-0006

15

2

Summary of Contents for FrameSaver NP 100

















Reviews: