background image

1

FrameSaver

®

 SLV 9520-ILM

Installation Instructions

Document Number 9520-A2-GN11-10

January 2003 

Contents

Product Documentation Online  ..................................................................... 2

Checking the Contents of the Shipping Carton ............................................. 2

Site Preparation Checklist ............................................................................. 3

Installing the FrameSaver SLV 9520-ILM ...................................................... 3

Cables Required  ........................................................................................... 4

Mounting the FrameSaver SLV 9520-ILM  ..................................................... 5

Connecting to Power ..................................................................................... 7

Connecting the Terminal Cable ..................................................................... 8

Menu Hierarchy ............................................................................................. 9

Power-On Self-Test  ....................................................................................... 12

Configuration Using Configuration Edit/Display  ............................................ 12

About the Installation Procedures  ................................................................. 13

Minimal Installation  ....................................................................................... 14

Full Installation and Setup  ............................................................................ 16

Automatic Configuration ................................................................................ 17

Connecting to the Network  ........................................................................... 17

Configuring SNMP Trap Managers and Traps  .............................................. 19

Verifying the End-to-End Path ....................................................................... 19

Connecting the LAN Cable  ........................................................................... 20

Connecting to the DTE  ................................................................................. 20

Checking that Data is Being Received .......................................................... 22

Checking PVC Connections .......................................................................... 22

 Important Safety Instructions  ....................................................................... 23

Government Requirements ........................................................................... 25

Warranty, Sales, Service, and Training Information  ...................................... 27

Document Feedback  ..................................................................................... 27

Trademarks ................................................................................................... 27

Patent Notification  ......................................................................................... 27

Summary of Contents for FrameServer SLV 9520-ILM





























Reviews: