iii
5100-A2-GB21-10
April 1997
About This Guide
Purpose and Audience
This guide describes how to install and set up the 5171 Remote PC Network
Interface Card (NIC) of the HotWire 5100 Digital Subscriber Line (DSL) Access
System. It is written for users of the HotWire DSL Access System.
Guide Summary
Section
Description
Chapter 1
About HotWire 5100 DSL Access System. Provides a
high-level overview of the operation of the HotWire 5100 DSL
Access System and lists its hardware and software
requirements for installing the 5171 PC NIC in the PC.
Chapter 2
Installation and Setup. Describes how to install and set up the
5171 PC NIC.
Chapter 3
Using the HotWire 5171 Diagnostics Utility. Describes how to
use the 5171 Diagnostics Utility.
Appendix A
LEDs. Provides the LED descriptions.
Appendix B
Pin Assignments. Provides the pinouts for the 5171 PC NIC.
Appendix C
Technical Specifications. Provides the specifications for the
5171 PC NIC.
Appendix D
I/O Base Address Switch Settings. Provides a table for switch
settings for possible I/O base addresses.
Glossary
Defines acronyms and terms used in this document.
Index
Lists key terms, acronyms, concepts, and sections in
alphabetical order and provides page references.
