Hotwire 6210, 6211, and 6381 User’s Guide
Figure 3.9. TCP/IP Properties in Windows XP
6. Click
on
twice to confirm your changes, and close the
Control Panel
.
3.2.3
Windows 2000:
1. In the Windows task bar, click on the
Start
button, point to
Settings
, and then select
Control Panel
.
2. Double-click
on
the
Network and Dial-up Connections
icon.
3. In
the
Network and Dial-up Connections
window, right-click on the
Local Area Connection
icon,
and then select
Properties
.
The
Local Area Connection Properties
dialog box is displayed with a list of currently installed
network components. If the list includes
Internet Protocol (TCP/IP)
, the protocol has already been
enabled, in which case you can skip to Step 10.
4. If
Internet Protocol (TCP/IP)
does not appear as an installed component, click on
.
5. In
the
Select Network Component Type
dialog box, select
Protocol
, and then click on
.
6. Select
Internet Protocol (TCP/IP)
in the
Network Protocols
list, and then click on
.
You may be prompted to install files from your Windows 2000 installation CD or other media. Follow the
instructions to install the files.
7. If prompted, click on
to restart your computer with the new settings.
8. After restarting your PC, double-click on the
Network and Dial-up Connections
icon in the
Control
Panel
.
9. In
Network and Dial-up Connections
window, right-click on the
Local Area Connection
icon, and
then select
Properties
.
10. In the
Local Area Connection Properties
dialog box, select
Internet Protocol (TCP/IP)
, and then
click on
.
6210-A2-GB21-00 April 2004 17
