8
If you are installing the Hotwire 6301 IDSL Router, go to page 7.
H
For a 6302 IDSL Router, use a straight-through cable to connect the other end
to a PC with an Ethernet Network Interface Card (NIC) installed.
-and/or-
H
Use an Ethernet crossover cable to connect the other end to an external hub.
00-16762
Ethernet
Crossover
Cable
Ethernet
Hub
8
7
6
5
4
3
2
1
Ethernet
Line
POWER
CONSOLE
DSL
2
1
ETHERNET
3
4
6302 IDSL Router
For the IDSL router cable pin assignments, refer to Cables & Connectors on
page 12.
3. The Console port acts as a DCE and uses an 8-pin straight-through cable for the
connection to a VT100-compatible terminal or a PC running a terminal emulation
program.
This is an optional connection used only for local configuration of the IDSL router.
For details, refer to Local Console Access on page 12.
Connect the DB9 adapter to the PC and connect the cable to a PC or laptop. lnsert
one end of the straight-through cable into the jack labeled CONSOLE. Insert the
other end into the DB9 adapter for the serial port of the VT100 terminal or PC.
POWER
CONSOLE
DSL
2
1
ETHERNET
3
4
6302 IDSL Router
VT100 Terminal
or PC
(9-pin Adapter)
00-16763
Console
Serial Line
