background image

 1

Hotwire

r

 6341/6342 Symmetric DSL Routers 

Installation Instructions

Document Number 6341-A2-GN10-00

February 2000

Contents

Hotwire 6341/6342 SDSL Routers Overview

 2

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Wiring and Cables Needed

   3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installing the DSL Access Wiring

 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Connecting to the DSL Access Wiring

 6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installing the Hotwire 6341/6342 SDSL Router

 7

. . . . . . . . . . . . . . . . . . . . . . . . 

Troubleshooting

 12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Cables & Connectors

  14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Important Safety Instructions

 19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com
Select Library 

 Technical Manuals 

 Hotwire DSL and MVL Systems.

Select the following document:

6371-A2-GB20
Hotwire DSL Routers User’s Guide

To request a paper copy of a Paradyne document:

H

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

H

Outside the U.S.A., call 1-727-530-8623

Product-Related Documents

Document Number

Document Title

8000-A2-GB26

Hotwire MVL, RADSL, and Packet SDSL Cards, Models
8310/8312, 8510/8373/8374, and 8343/8344, User’s Guide

8000-A2-GB27

Hotwire Network Design Guide: Bridged Model

Summary of Contents for Hotwire 6341
























Reviews: