System Terminal Interface
4-4
7900-A2-GB20-00
March 1998
3. Set your modem parameters as follows:
— 9600 baud
— 8 bit
— no parity
— 1 stop bit
— disable or suppress result codes
MTU-M Main Menu
The MTU-M automatically boots up upon power up or MTU-M reset and displays
a series of status messages as the MTU-M polls and receives information from
each xTU-C. After polling of the primary nest (Nest 1) is complete, the MTU-M
Main Menu appears. The polling of secondary nests (Nest 2, 3, and 4) continues
after the Main Menu appears.
Commands can be entered as complete words (status, alarm on, alarm off) or
can be abbreviated to the minimum number of characters that uniquely identify it
from other options. In most cases typing the first one or two characters of the
command is sufficient (for example, s for status).
NOTE:
Throughout this document the menu path taken to access the screen is
provided at the top of each screen sample.
The MTU-M Main Menu screen appears as follows:
Menu path: Main
MTU-M Maintenance Processor Main Menu
Select Command:
COMMAND DESCRIPTION
Status
– Display System xTU–C/R status
Performance
– Display xTU–C/R line statistics
LoopBack
– Perform LoopBack Function
Reset
– Reset Command for xTU–C/R’s
Alarms
– MTU–M alarms log functions
Maintenance
– MTU–M maintenance functions
Version
– MTU–M firmware version, serial number
MTU–M –>
Summary of Contents for HOTWIRE 7900
Page 8: ...Contents iv 7900 A2 GB20 00 March 1998 This page intentionally left blank ...
Page 28: ...System Terminal Interface 4 6 7900 A2 GB20 00 March 1998 This page intentionally left blank ...
Page 72: ...Testing 9 12 7900 A2 GB20 00 March 1998 This page intentionally left blank ...
Page 82: ...Glossary GL 4 7900 A2 GB20 00 March 1998 This page intentionally left blank ...