Worksheets
A-3
7915-A2-GB20-20
September 1997
G.703-to-V.35/V.11 Configuration
To connect a G.703-compatible unit on the CO side and a V.35/V.11-compatible
unit on the CP side, configure the units as follows. Terminal Mode factory defaults
are in bold (for Switchpack mode defaults, see
Appendix C
).
Configuration
Option
V.35/V.11-Compatible Unit
(Customer Premises)
G.703-Compatible Unit
(Central Site)
Card Type
CP
CO
Payload Rate
1 – 32 (64 – 2048 Kbps)
N/A
Framing,
Starting Time Slot
N/A
If the payload rate is less than
2048 Kbps, select a starting time
slot appropriate for the payload
rate.
If the payload rate is 2048 Kbps,
use Unframed.
E1 Line Code
N/A
HDB3 or AMI
Timing
Loop (not configurable)
N/A
V.35/V.11-to-V.35/V.11 Configuration
Router
V.35 Unit
V.35
LAN
Customer Premises
Router
V.35 Unit
V.35
LAN
Central Site
Cross-campus
2-wire facility
97-15534
To connect two V.35/V.11-compatible units, configure the units as follows.
Terminal Mode factory defaults are in bold (for Switchpack mode defaults, see
Appendix C)
.
Configuration
Option
V.35/V.11-Compatible Unit
(Customer Premises)
V.35/V.11-Compatible Unit
(Central Site)
Card Type
CP
CO
Payload Rate
1 – 32 (64 – 2048 Kbps)
Must be same as CP side
Timing
Loop (not configurable)
Internal or External
