8335-A2-GZ40-60
March 2005
9
Logging In to the MCC Card
You can log in to the management card using either a local VT100- compatible
terminal or a remote Telnet connection.
After you enter your user ID and password, the system displays the Main Menu.
See the
Hotwire Management Communications Controller (MCC) Card,
IP Conservative, User’s Guide
for information about selecting the unit from the
card selection screen.
Entering Card Information
After accessing your line card for the first time, use the Card Information screen to
configure basic information about the card. To access the Card Information
screen, follow this menu selection sequence:
Configuration
→
Card
→
Card Info
(
A-A-A
)
Configuring the DSL Ports
You can set the rate of the DSL ports from the DSL Port Configuration screen. To
access the DSL Port Configuration screen, follow this menu selection sequence:
Configuration
→
Physical Ports
→
DSL Ports
(
A-B-B
)
Configuring the ATM Parameters
You can configure ATM parameters from the ATM Parameters screen. To access
the ATM Parameters screen, follow this menu selection sequence:
Configuration
→
ATM Switch
→
ATM Parameters
(
A-E-A
)
Configuring ATM Cross Connection
You can configure VC connections from the line card to the endpoint with the ATM
Cross Connect screen. To access the ATM Cross Connect screen, follow this
menu selection sequence:
Configuration
→
ATM Switch
→
ATM Cross Connect
(
A-E-B
)
