8
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded and allows groups of configuration options to be
displayed. To access the Configuration Edit/Display screen, follow this menu selection
sequence:
Main Menu
→
Configuration
→
Current Configuration
– or –
Main Menu
→
Configuration
→
Default Factory Configuration
Select . . .
To Access the . . .
To Configure the . . .
Network
Network Interface Options
DSL interface ports.
DSX-1
G.703
DSX-1 Interface Options
G.703 Interface Options
DSX-1 interface ports
(Models 8747 and 8777).
G.703 interface ports
(Model 8779).
Copy Ports
Copy Ports Options
DSL network and DTE
interface ports by copying
options from port to port.
System
Options
System Options
General system options of
the unit.
System Clock
System Clock Options
LTU system clock options.
Cross Connect
Cross Connect Mode Options
Assign Time Slots Options
DS1 and DS0
cross-connect ports.
Management
and
Communication
Telnet Session Options
General SNMP Management
Options
SNMP NMS Security Options
SNMP Traps Options
Management support of the
unit through SNMP and
Telnet.
NOTE:
The SNMP NMS Security Options screen is not available in IP Conservative mode.
