6. Messages and Troubleshooting
8799-A2-GB20-10
April 2003
6-5
Command Failed
The command could not be
performed.
Try again.
Contact your system
administrator to verify your
password.
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
1. Delete another
login/password combination.
2. Re-enter the new login ID.
Please Wait
Command takes longer than
5 seconds.
Wait until message clears.
Test Active
A test is running and no
higher priority health and
status messages exist.
Contact service provider if
test initiated by the network.
Wait until the other test ends
and message clears.
Cancel all tests from the Test
screen.
Stop the test from the same
screen the test was started
from.
0.0.0.0 is an invalid
IP address
An IP address of all zeros
was entered.
Enter a valid, non-zero IP
address.
Table 6-1.
Device Messages (2 of 2)
Device Message
What Message Indicates
What To Do
