6
Installing the Hotwire 6350 ReachDSL Modem
Place the Hotwire 6350 ReachDSL Modem on a flat surface with clearance for the rear
connectors.
Procedure
1.
UNPLUG TELEPHONE.
If a telephone is connected at
the RJ11 wall jack where the ReachDSL modem will be
installed, unplug the telephone line from the wall jack.
2.
CONNECT A TELEPHONE.
(Optional – go to
Step 3
if you are not
connecting a telephone to the modem.)
Plug the existing telephone interface cable
that was unplugged in
Step 1
into the jack
labeled PHONE.
3.
CONNECT DSL LINE.
Use the supplied
RJ11 6-pin interface cable for the ReachDSL
line connection. Insert one end of the cable
into the jack labeled LINE. Insert the other
end of the cable into the RJ11 wall jack.
RJ11
Wall Jack
PHONE L
INE
ETHERNET
POWER
PHONE
RJ11
Wall
Jack
PHONE LINE
RJ11
6-pin
Interface
Cable
LINE
