Paragon Pro Panellift Hangpro 150 Operator'S Manual Download

Page: 4 / 16

WA R N I N G

Read and follow these warnings and the instructions that follow. Failure to do so could result in serious

property damage and/or serious bodily injury.

Ques�ons? - Call paragon Pro Manufacturing Solu�ons Customer Service at 1-800-448-0822 or 701-775-0551

Decal Warnings:

Please note these warning decals

located on the HANGPRO™. These

decals do not replace the necessity of

reading and understanding the

instructions within this operators

manual.

Cau�on When Assembling your HangPro™

Align the Upper Mast Assembly with the Lower Mast

Assembly so the two bolt holes line up. THIS IS A PINCH

POINT. KEEP HANDS AWAY FROM THE JOINT WHERE THE

UPPER AND LOWER MASTS MEET.

Pinch Point

Cau�on When Assembling your HangPro™

Insert BOTH 3’ x 3/8” bolts and 3/8” Nylock nuts. FAILURE

TO INSERT BOTH BOLTS COULD RESULT IN THE UPPER

MAST PIVOTING RAPIDLY DOWNWARD, POTENTIALLY

CAUSING PROPERTY DAMAGE OR SERIOUS INJURY.

IN A DRY ENVIRONMENT

AVOID MOISTURE AND WATER

Summary of Contents for Panellift Hangpro 150

















Search results

Summary of Contents for Panellift Hangpro 150

Reviews:

Related manuals for Panellift Hangpro 150

Brands by name

Popular brands

Paragon Pro Panellift Hangpro 150, Operator'S Manual

Search results

Summary of Contents for Panellift Hangpro 150

Reviews:

Related manuals for Panellift Hangpro 150

Brands by name

Popular brands