7
4.
Unit is now ready to be used. Plug cord in, turn on warmer & adjust
thermostat to the products recommended serving temperature.
This will turn on the heating element in the base of the unit and will
keep your product hot and fresh. The thermostat knob can be set to
maximum, for a limited time, to heat product quicker.
5.
When finished, wait for the machine to cool down, tip the unit over a
bucket/sink and let remaining water pour out.
6.
Keep the power switch in the off position when the warmer is empty or
not being used.
WARNING:
Always turn the
POWER
switch to
OFF
when the machine is not in use.
Regenerating and holding of food temperature
Regenerating (also called rethermalization) is the process of re-heating food to safe service
temperatures for consumption. This unit will take food pr
oducts and heat to 165˚ (74˚C) within a two
hour period.
This unit will also maintain the temperature at or above 150˚ (66˚C) throughout the product for at least
two hours even when coverings are removed. Please note: coverings are recommend as they help
maintain the temperature of the product.
Paragon International takes no responsibility for actual serving
temperature of food product. It is the responsibility of the user to
make sure that every product is served at a safe temperature.
