A539
4.
If moving the unit from its current location, the oil must be drained. DO NOT move this unit
when filled with oil! Allow hot cooking oil to cool below 140°F before attempting drain the unit.
5.
To drain the unit, have an appropriate container in place to receive the oil.
6.
With the drain valve CLOSED, remove the drain plug.
7.
Slide the safety collar up on the drain valve handle, then OPEN the drain valve to empty the
cooking oil from the fryer tank.
8.
For unit cleaning instructions, see Care and Cleaning section.
Care and Cleaning
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only use
non-toxic, food grade cleaners). A clean looking, well-kept fryer is one of the best ways of advertising
your product.
Follow the directions below to clean and sanitize the unit each day after use.
1.
With the fryer OFF, unplug the unit and allow it to cool before attempting to clean it after use.
DO NOT move this unit when filled with oil! Allow hot cooking oil to cool below 140°F before
attempting drain the unit.
2.
Make sure to clean all pans/accessories in order to sanitize them before each use.
3.
Make sure the drain valve is securely closed and the drain plug is fully tightened into place, then
fill the tank with water to the MINIMUM oil level. DO NOT FILL above the minimum oil level or
equipment damage may occur.
4.
Add appropriate amount of dish soap. Paragon also recommend the use of Carbon-Off Cleaner
5.
Bring solution to a boil (DO NOT heat above 250°F), then turn the fryer OFF, unplug the unit and
allow solution to cool to below 100°F.
6.
Once cooled, drain and remove all solution.
7.
Clean the outside of the unit with a soft cloth, dampened with soap and hot water.
8.
Wipe the stainless steel parts with a clean cloth and cleaner designed for stainless steel. DO
NOT use oven cleaners or abrasive materials as they will damage parts of the fryer.
9.
Thoroughly dry the unit after cleaning, including inside any drain valves.
ORDERING SPARE PARTS
1.
Identify the needed part by checking it against the photos, illustrations, and/or parts list.
(General images may be used in manual for reference only.)
2.
Use only approved replacement parts when servicing this unit.
3.
When ordering, please include part number, part name, and quantity needed.
4.
Please include your model number, serial number, and date of manufacture (located on the
fryer nameplate/data plate) with your order.
5.
To order visit manufacturedfun.com, email or call Paragon customer service at
or USA 1-(800)-433-0333 or write to Paragon International, Inc, 731
W 18
th
Street, Nevada, Iowa 50201.
