(800) 471-8769
10
Copyright 2021 © Paragon Tank Truck Equipment
• Paragon recommends that a factory dealer/technician program your tractor for optimal ECM/TCM performance.
• Ensure the engine range RPM is programmed within the operational limits of the P657 Blower.
• Ensure the engine RPM ramp up rate, after PTO engagement, is set for no more than 100 rpm per second.
• Ensure the torque output settings are correct for the equipment operation parameters.
Note:
For more available options regarding ECM/TCM programming, please contact your local chassis dealer.
• Engine is off and keys are not in the ignition.
• Ensure all connections are supported.
• Ensure the Camlock (discharge) connection is venting to atmosphere.
• Ensure the air filter is properly installed and free of contaminates.
• Ensure the P657 can be turned by hand.
• Ensure all equipment supplied labels are installed.
• Ensure all fasteners are installed and torqued properly.
• Ensure ECM parameters are properly set (if applicable).
• Ensure oil level is correct (see page 12 for details).
ECM/TCM Programming
Pre-Start Up
