background image

(800) 471-8769 

 

 

 

21

Copyright 2021 © Paragon Tank Truck Equipment

WARRANTY - TRUCK BLOWERS 

Subject to the terms and conditions hereinafter set forth in General Terms of Sale, Paragon Tank Truck Equipment LLC 
(the Seller) warrants products and parts of its manufacturer, when shipped and its work (including installation and start-up) 
when performed, will be of good quality and will be free from defects in material and workmanship. This warranty applies 
only to Seller’s equipment, under use and service of products, for a period as stated in the table below. Due to the varying 
condition of installation and operation, all performances claims are subject to a plus or minus 5% variation. (Non-standard 
materials are subject to a plus or minus 10% variation) 

THIS WARRANTY EXTENDS ONLY TO BUYER AND/OR ORIGINAL END USER, AND IN NO EVENT SHALL THE 
SELLER BE LIABLE FOR THE PROPERTY DAMAGE SUSTAINED BY A PERSON DESIGNED BY THE LAW OF ANY 
JURISDICTION AS A THIRD PARTY BENEFICIARY OF THIS WARRANTY OR ANY OTHER WARRANTY HELD TO 
SURVIVE SELLER’S DISCLAIMER. 

All accessories furnished by seller but manufactured by others bear only that manufacturer’s standard warranty. 
All claims for defective products, parts, or work under this warranty must be made in writing immediately upon discovery 
and, in any event within one year from the date of the shipment of the applicable item and all claims for defective work 
must be made in writing immediately upon discovery and in any event within one year from date of completion thereof by 
Seller. Unless done with prior written consent of Seller, any repairs, alterations, or disassembly of Seller’s inspection and 
warranty. Installation and transportation costs are not included and defective items must be held for Seller’s inspection 
and warranty. Installation and transportation costs are not included and defective items must be held for Seller’s 
inspection and returned to Seller’s Ex-works upon request.  
 

 

THERE ARE NO WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY WHICH EXTEND BEYOND THE 
DESCRIPTION ON THE FACE HEREOF, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS OF PURPOSE. 

After Buyer’s submission of claim as provided above and its approval, Seller shall either repair or replace its product, part, 
or work at the original Ex-works point of shipment, or refund an equitable portion of the purchase price. 
The products and parts sold hereunder are not warranted for operation with erosive or corrosive materials or those which 
may lead to build up of materials within the product supplied, nor those which are incompatible with the materials of 
construction. The Buyer shall have no claim whatsoever and no product or part shall be deemed to be defective by reason 
of failure to resist erosive or corrosive action nor for problems resulting from build-up of material within the unit nor for 
problems due to incompatibility with the materials of construction. 

 

Any improper use, operation beyond capacity, substitute of parts not approved by Seller, or any alteration or repair 

by others in such manner as in Seller’s judgement affects the product materially and adversely shall void this warranty. 

 

No employee or representative of Seller other than an Officer of the Company is authorized to change this warranty 

in any way or grant other warranty. Any such change by an Officer of the Company must be in writing. 

 

The foregoing is Seller’s only obligation and buyer’s only remedy for breach of warranty, and except for gross 

negligence, willful misconduct and remedies permitted under the General Terms of Sale in the sections on

 

CONTRACT 

PERFORMANCE, INSPECTION AND ACCEPTANCE,

 and the 

PATENTS CLAUSE

 

hereof, the forgoing is 

BUYER’S ONLY 

REMEDY HEREUNDER BY WAY OF BREACH OF CONTRACT TORT OR OTHERWISE, WITHOUT REGARD TO 
WORK WHETHER ANY DEFECT WAS DISCOVERED OR LATENT AT THE TIME OF DELIVERY OF THE PRODUCT 
OR WORK.

 In no event shall Buyer be entitled to incidental or consequential damages. Any action for breach of this 

agreement must commerce within one year after the cause of action has occurred.  

Paragon Tank Truck Equipment LLC

., 2111 US Hwy 411 NE | Cartersville, Georgia USA 30121 

Tel: 770-387-3820 | Toll: 800-471-8769 | Fax: 770-387-3824 | 

www.paragondirect.com

 | 

info@paragondirect.com

 

Product Type

Warranty Duration

New

18 months from date of shipment, or 12 months after initial startup date, whichever occurs 

first.

Remanufactured

12 months from date of shipment, or 12 months after initial startup date, whichever occurs 

first.

Repair

12 months from date of shipment, or remaining warranty period, whichever is greater

Summary of Contents for P657























Reviews: