FILLING THE WATER JAR
1
Turn the water inlet cap to “OPEN”.
2
Using the top access funnel, slowly pour distilled water through the funnel and into the
water jar.
3
Please make sure that during all time, the water
level is between the MIN (bottom red line) and
MAX (top red line) red indicator lines on the water
jar. If the water level dips below the MIN level, the
facial vaporizer will shutoff automatically and may
be permanently damaged.
4
The capacity of the water jar is 1.1 liters which support approximately 30 minutes of
operation.
5
Please use DISTILLED WATER only. Do not add essential oils or herbs into the
distilled water source. Not using distilled water and/or adding oil directly into the water
jar so will cause hot water spitting from the exit nozzle and injury.
USE
MAX
MIN
Silicone Gasket
REMOVING/INSTALLING THE WATER JAR
1
Hold the jar firmly with one hand.
2
Use the other hand to turn the retaining screw knob.
3
Swing the brace away and carefully remove the glass jar.
4
Check for the gasket resting atop the glass jar. Its function is to help seal the water jar and to
prevent water from leaking.