Web Site:
www.parallax.com
Forums:
forums.parallax.com
Sales:
sales@parallax.com
Technical:
support@parallax.com
Office:
(916) 624-8333
Fax:
(916) 624-8003
Sales:
(888) 512-1024
Tech Support:
(888) 997-8267
Copyright © Parallax Inc.
XBee Adapter Board (#32403)
v1.1 3/4/2010 Page 1 of 4
XBee Adapter Board (#32403)
This low cost XBee Adapter Board comes in a kit form and provides a cost-effective solution to interfacing
to any XBee or XBee Pro module. By using this adapter board you can provide an easy interface to the
XBee or XBee Pro modules by converting the 2mm pin spacing to breadboard friendly 0.100” spacing.
The adapter boards also provide a means to connect pluggable wires or solder connections and also
provide mounting holes.
Features
Converts XBee 2mm pin spacing to 0.100” pin spacing
Provides easy pluggable wire or solder connections
Includes mounting holes
Pin-out compatible with our other XBee Adapter boards
Kit form for flexible configuration
Key Specifications
Power requirements: 3.3V pass-through to XBee module
Communication: Serial pass-through to XBee module
Operating temperature: -40 to +185°F (-40 to +85°C)
Dimensions: 1.16” L x 1.00” W x 0.58” H* (29.4 mm x 25.6 mm x 14.8 mm*)
* when headers are attached
Application Ideas
Easy connection of XBee modules to breadboard or proto board
Convenient way to mount the XBee module away from the microcontroller
Packing List
(1) XBee Adapter Board PCB
(2) 10-pin 2mm sockets
(1) 40-pin SIP header
Tools Required
Soldering Iron (always wear safety glasses when soldering)
Solder (some soldering experience required)
Flux (if not using rosin/flux-core solder)
Diagonal cutters or Exacto knife (optional)
