14
Network Camera User Manual
4.2
Image Configuration
Image Configuration includes Display, Video/Audio, OSD, Video Mask and ROI Config.
4.2.1
Display Configuration
Go to Image
Display interface as shown below. The image’s brightness, contrast, hue and
saturation and so on for common, day and night mode can be set up separately. The image
effect can be quickly seen by switching the configuration file.
Brightness
: Set the brightness level of the camera’s image.
Contrast
: Set the color difference between the brightest and darkest parts.
Hue
: Set the total color degree of the image.
Saturation
: Set the degree of color purity. The purer the color, the brighter the image is.
Sharpness
: Set the resolution level of the image plane and the sharpness level of the image
edge.
Noise Reduction
: Decrease the noise and make the image more thorough. Increasing the
value will make the noise reduction effect better but it will reduce the image resolution.
Defog:
Activating
this function and setting an appropriate value as needed in foggy, dusty,
