background image

21

S

ERVICE

H

O W

 

T O

 O

B T A I N

 S

E R V I C E

For warranty service, contact an Authorized Paramount Dealer or a Paramount Customer 
Service representative at 1-800-721-2121 or 1-213-721-2121. Or by E-mail at 
nasales@paramountfitness.com. Before you call, please have the following information 
ready.

• Model Number: FS-50 LEG EXT/CURL

• Serial Number: ________________________

• Date of Installation: ____________________

• A brief description of the problem

F

I N A L

 C

H E C K

1. If you haven’t already done so, lubricate the guide rods and seat adjustment tubes with 
a teflon spray lubricant. Paramount recommends using TriFlow

TM

 brand.

2. Adjust the foot plate through each position. Verify that the adjustment pin inserts freely 
into each position and is fully engaged.

3. Place the selector pin into the holder on the cap plate. Push the foot plate out slowly 
until it tops out against the stop. Verify that the cable moves freely, without any binding.

4. Verify that the selector pin can be inserted into each weight plate.

5. Perform the exercise to verify the cable routes smoothly and the machine operates 
correctly.

Serial Number

The serial number is located on the front of the upright 

frame at the bottom as shown.

Summary of Contents for FS-50

























Reviews: