background image

1

P

ARAMOUNT

 L

IMITED

 W

ARRANTY

READ PARAMOUNT’S WARRANTY SET FORTH BELOW PRIOR TO USING PARAMOUNT PRODUCTS. BY INITIAL USE OF PARAMOUNT
PRODUCT YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. THE WARRANTY
PERIODS COMMENCE ON THE INVOICE DATE OF THE ORIGINAL PURCHASE. LABOR COVERED DURING WARRANTY PERIODS
REQUIRES PRIOR AUTHORIZATION OF PARAMOUNT. PARAMOUNT WARRANTS TO THE ORIGINAL BUYER OF ALL NEW EQUIPMENT
PURCHASED FROM A PARAMOUNT AUTHORIZED DEALER OR FROM A PARAMOUNT AUTHORIZED MANUFACTURING CONTRACTOR
THAT THESE PRODUCTS WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE AND SERVICE FOR
THE FOLLOWING PERIODS AND IN THE FOLLOWING RESPECTS:

STRENGTH PRODUCTS

TEN YEAR WARRANTY COMMERCIAL PRODUCTS – Frame Components and Welds excluding coatings 

FIVE YEAR WARRANTY - Bronze Bushings, Sealed Rotating Bearings, Pulleys, Weight plates and Guide Rods excluding coatings

ONE YEAR WARRANTY - Cables, Linear Bearings and Shafts and all other components not mentioned elsewhere in this warranty

90-DAY WARRANTY - Normal wear parts including but not limited to labels, upholstered pads and grips

ONE YEAR WARRANTY – Labor 

THE SHIPPING MODE OF PARTS REPLACED UNDER WARRANTY TO BE DETERMINED BY PARAMOUNT. PARTS REPLACED UNDER
WARRANTY CARRY THE REMAINING ORIGINAL WARRANTY PERIOD OR 90 DAYS, WHICHEVER IS LONGER. 

THIS LIMITED WARRANTY DOES NOT COVER AND NO WARRANTY IS GIVEN WITH RESPECT TO:

Products not manufactured by Paramount or by an Authorized Paramount Manufacturing Contractor.

Products which are altered without the express written consent of Paramount.

Products purchased other than directly from Paramount or through a Paramount Authorized Dealer.

Defective paint, chrome and other coatings caused by environmental conditions including but not limited to climate conditions, 

cleaning materials and moisture or humidity coming from HVAC systems. 

All parts including but not limited to frames with cosmetic damage. Such damage includes but is not limited to scratches and 

dents caused after the initial installation. 

Products not maintained in compliance with Paramount’s specifications as shown in the owners’ manual and on product labels.

Products with a missing, unreadable or altered serial tag.

Labor for components beyond their warranty coverage.

On site service calls to solve installation errors or to provide technical training on the proper use and servicing of the equipment.

THIS WARRANTY APPLIES UNDER THE FOLLOWING CONDITIONS.

These products have not been subjected to misuse, abuse, modifications not authorized by Paramount or any damage caused 

by improper handling, natural disasters, acts of God or servicing by non-Authorized Dealers. This includes but is not limited to 

the relocation of the product and the application of cleaning materials or lubricants not specified by Paramount.

These products remain in possession of the original purchaser.

Warranty claims are made within the warranty periods previously shown and that such claims occur within 30-days after the 

date of discovery. 

Labor coverage applies only within the United States and Canada. 

Warranties for parts and labor may vary outside the United States. Contact the Paramount Dealer within your geographic area 

for warranty terms.

Maximum load capacities as specified by Paramount are not exceeded.

THE OBLIGATION OF PARAMOUNT UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING WARRANTED DEFECTIVE

PARTS, AS PARAMOUNT MAY ELECT, AT PARAMOUNT'S PLANT IN LOS ANGELES, CALIFORNIA. PURCHASER IS RESPONSIBLE FOR

ALL TRANSPORTATION AND INSURANCE COSTS ON RETURNED OR REPLACED EQUIPMENT TO AND FROM PARAMOUNT'S PLANT IN

LOS ANGELES. ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE AND THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO ONE-YEAR DURATION FROM THE DATE

OF DELIVERY TO THE ORIGINAL PURCHASER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY

LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE REMEDY OF REPAIR AND REPLACEMENT IS THE EXCLUSIVE AND

SOLE REMEDY OF THE PURCHASER.

PARAMOUNT SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES OF ANY KIND,

INCLUDING, BUT NOT LIMITED TO, DAMAGE OF LOSS OF PROPERTY OR EQUIPMENT AND LOST PROFITS AND REVENUE. SOME

STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION

OR EXCLUSION MAY NOT APPLY TO YOU. NO ACTION FOR BREACH OF THIS WRITTEN LIMITED WARRANTY OR AN IMPLIED

WARRANTY SHALL BE COMMENCED MORE THAN ONE YEAR AFTER THE ACCRUAL OF THE CAUSE OF ACTION. THIS WRITTEN LIMITED

WARRANTY IS THE COMPLETE, FINAL AND EXCLUSIVE AGREEMENT OF THE PARTIES WITH RESPECT TO THE QUALITY OR

PERFORMANCE OF THE GOODS AND ANY AND ALL WARRANTIES AND REPRESENTATIONS. NO MODIFICATIONS OF THIS LIMITED

WARRANTY OR WAIVER OF ITS TERMS SHALL BE BINDING ON EITHER PARTY UNLESS APPROVED IN WRITING BY AN AUTHORIZED

CORPORATE OFFICER OF PARAMOUNT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE

OTHER RIGHTS, WHICH MAY VARY, FROM STATE TO STATE. CONTACT PARAMOUNT FITNESS CORP., 6450 E. BANDINI BLVD., LOS

ANGELES, CALIFORNIA 90040-3185, FOR A LIST OF AUTHORIZED DEALERS OR BEFORE RETURNING ANY DEFECTIVE EQUIPMENT.

PARAMOUNT FITNESS CORP. ©JANUARY 1, 2014.

Summary of Contents for FS-52

































Reviews: