background image

24

S

ERVICE

H

O W

 

T O

 O

B T A I N

 S

E R V I C E

For warranty service, contact an Authorized Paramount Dealer or a Paramount Customer 
Service representative at 1-800-721-2121 or 1-323-721-2121. You can also email us at 
nasales@paramountfitness.com. 

Before you call, please have the following information ready:

• Model Number: FS-53

• Serial Number: ________________________

• Date of Installation: ____________________

• A brief description of the problem

F

I N A L

 C

H E C K

1. If you haven’t already done so, lubricate the guide rods and seat adjustment tubes with 
a teflon spray lubricant. Paramount recommends using TriFlow

TM

 brand.

2. Adjust the thigh pad through each position. Verify that the adjustment pin insert freely 
into each position and is fully engaged.

3. Place the selector pin into the holder on the cap plate. Pull the Lat cable out slowly until 
the cap plate tops out against the top upright frame. Verify that the cable moves freely, 
without any binding. Repeat this procedure with the row cable.

4. Verify that the selector pin can be inserted into each weight plate.

5. Perform the exercise on each station to verify the cable routes smoothly and the 
machine operates correctly.

The serial number is located on the rear of the upright 

frame at the bottom as shown.

Serial Number

Summary of Contents for FS-53





























Reviews: