background image

4

1.  Review and understand all of the warning labels affixed to this machine and on the facility safety 

sign. Replace any warning label at first sign of wear. Labels and the Facility Safety Sign may be 
obtained from Paramount free of charge. 

2.  Be certain that the machine operation is understood before it is used. Refer to the instruction label 

provided with the machine. 

3.  Keep children away from this equipment. Supervise use by teenagers.
4.  DO NOT high-pin or double-pin the weight stack. DO NOT allow the machine to be used if the top 

plate or weight stack is pinned in a raised position. Use an assistant and carefully return the 
machine to the proper position with the cap plate resting on the top weight. Inspect the cable to 
ensure that it is seated in all of the pulleys. 

5.  Use ONLY Paramount weight selector pins. Other manufacturer’s pins may work free of the weight 

stack causing possible injury. Be certain the pin is completely inserted prior to use. 

6.  Cables: Inspect the entire cable weekly and the end fittings daily. Pay close attention to the area 

going over pulleys and to the end connections. 

Replace all cables at first signs of wear or on an 

annual basis. Use only Paramount supplied replacement cables.

7.  Nuts, Bolts, and Fasteners: Check tightness weekly. If any hardware has become loose, retighten 

and/or use Loctite

 Threadlocker 242. 

8.  Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any component at first 

signs of wear.

9.  Adjustment Pins: check the function of the position selector pins on the adjustable arms. Make 

sure that the selector pin inserts completely into each position without binding.

10.  DO NOT attempt to free any jammed assemblies by yourself as this may cause injury.
11.  DO NOT use adder weights or adder weight systems on this machine. 
12.  Instruct Users NOT to make arm position adjustments during exercise or when pulling on the 

cable end. Always support the arms when making position adjustments.

13.  Instruct Users to return the handgrips and bars to their rest position before releasing. Sudden 

release of the handgrips and bars may cause serious injury to users or bystanders.

14.  Instruct users NOT to attach two cables to single bars or handles. Use one handle or exercise bar 

for each weight stack at a time.

15.  Instruct Users not to wear loose or dangling clothes or have headphone wire hanging when using 

this equipment.

16.  It is recommended that users receive a thorough medical exam before commencing an exercise 

program. All medical issues should be reviewed to ensure that weight training will not aggravate 
pre-existing medical conditions.

17.  Check the function of your machine regularly by verifying the following:

Cables and end fittings are intact.

All adjustments are possible and carried out with ease.

The proper selector pin is in the weight stack. 

The exercise is performed smoothly, free of noise and/or binding. 

18.  Follow the installation guidelines provided with the products. 
19.  Retain these instructions for future reference.
20.  If you have any questions, do not hesitate to contact your Paramount dealer or Paramount 

Fitness Corp. at (800)721-2121 or (323) 721-2121 or nasales@paramountfitness.com.

21.  Refer to Maintenance Schedule label on the machine and this manual for when to perform 

maintenance.

S

AFETY

Summary of Contents for FS-55 Pec Fly/Rear Delt

























Reviews: