GENERAL DESCRIPTION - 6
For questions, replacement parts, service help or other assistance,
please call the Customer Service Hotline!
TOOLS AND PARTS NEEDED FOR ASSEMBLY
NOTE :
20 Pound, 5 Gallon Capacity – Standard LPG Tank/Cylinder is NOT
supplied.
Tools Needed :
Adjustable Wrench
1.
Phillips Head Screwdriver (#2 or #3 blade)
2.
Spray Bottle of Soapy Water or Paint Brush and Soapy Water
3.
(to check for leaks)
Parts Supplied:
Main Burner/Head assembly w/flexible gas hose
•
1 pc. 18’’ Cylinder Base
•
LPG Tank housing unit
•
34’’ Support Post Component w/ flange
•
Post Support Brackets (3 each)
•
LPG Gas Regulator with Hose
•
32’’ Aluminum Reflector Hood (5 pc. Components, see fig. D)
•
Fig. A 4 ea. – M6 x 10mm bolts for Burner Assemply & Upper Post
•
Fig. B 6 ea. – M6 x 35mm long bolts with M6 nuts and washers for
•
Post & Brackets
Fig. C 3 ea. – M8 x 16mm short bolts for Post Bracket to Cylinder Base
•
Fig. D 12 ea. – ¼’’ cap nuts for attaching reflector hood components
•
Fig. E 3 ea. – Large wing nut to attach reflector hood to burner head
•
unit
