Paramount Fitness Stealth PH-F-126, Manual

FOR YOUR SAFETY

Do NOT touch or move heater for at 
least 45 minutes after use.

To enjoy years of outstanding performance from your heater, make sure you 

perform the following maintenance activities on a regular basis:

cleaning agents.

While cleaning your unit, be sure to keep the area around the burner

and control compartment dry at all times. Do not submerge the

control valve assembly. If the gas control is submerged in water, do

NOT use it. It must be replaced.

air passageways clean. Signs of possible blockage include:

Heater does NOT reach the desired temperature.

Heater glow is excessively uneven.

Heater makes popping noise.

condition can damage heater and render it unsafe for use. Clean

burner holes by using a heavy-duty pipe cleaner. Compressed air

may help clear away smaller particles.

screen with warm soapy water if any carbon deposits develop.

Note: 

In a salt-air environment (such as near an ocean), corrosion 

occurs more quickly than normal. Frequently check for corroded areas 

and repair them promptly.

Use high-quality automobile wax to help maintain the appearance 

of your heater. Apply to exterior surfaces from the post down.  

DO NOT apply to emitter screen or domes.

:

• Turn control knob OFF.

• Disconnect LP source.

• Store heater upright in an area

sheltered from direct contact

with inclement weather (such

as rain, sleet, hail, snow, dust

and debris).

• If desired, cover heater to

protect exterior surfaces and

to help prevent build-up in air

passages. Never leave LPG tank

exposed to direct sunlight or

excessive heat.

Wait until heater is 

cool before covering.

should repair gas passages and 

associated components.

Caution: 

Always allow heater 

to cool before attempting 

service.

20

CARE AND MAINTENANCE