CV input (optional)
The CV input lets you hook up an external Low Frequency Square
Wave Oscillator (LFO) that will modulate the upper octave for crazy
sounds. The CV input can also trigger the PLL chip synthesis, so you
can use it as a noise maker without any guitar connected to the
input.
It works well with a wide range of voltages, so try connecting the
LFO output frpm a synthesizer, modular system or the Parasit
Studio New Wave CV Generator.
CV jack Wiring
To hook up the CV (control voltage) input jack, connect the CV pad
on the PCB to the tip of a 3.5mm jack (or jack of your choice).
Make sure that the sleeve of your jack is connected to ground (it
usually is connected to ground via the enclosure unless you have an
isolated jack type). If you use a stereo/balanced jack, just leave the
ring lug unconnected.
Summary of Contents for 0415 GUITAR SYNTH
Page 7: ...Schematic...
