![background image](http://html2.mh-extra.com/html/parasit-studio/1985/1985_build-document_3630973005.webp)
Drilling template
(1590B)
•
This template is approximate. Use at your own risk!
•
Make sure your printer isn't doing any scaling / is set to 100%
print size.
•
Drill the DC jack and input/output jacks (and the optional
reset switch) to your own preference.
•
The LED hole here is 6mm, for using a 3mm LED with a bezel.
•
Measure and confirm before drilling!
Summary of Contents for 1985
Page 6: ...Schematic...