Parasound HALO P 7, Owner'S Manual

19

MAKING ADJUSTMENTS IN THE SETUP MENU

Zhd Input Assign

Since the P 7 is a pure analog preamplifi er it does not offer any video switching. The P 7 does have 
the ability to link to the Parasound Zhd 5 input HDMI selector (sold separately). This feature gives 
you automatic switching of HDMI video sources as you select the audio sources on your P 7. In 
the Zhd Input Assign setup, you can assign any of the Zhd’s 5 inputs to be selected simultaneously 
with any of the P 7s 10 sources. Please note that this feature allows you to switch HDMI sources 
but does not enable your P 7 to decode digital audio carried in the HDMI signal.
Press the Enter button to proceed into the Zhd Input Assignment.
In the Assignment page you will select the P 7 input and the Parasound Zhd HDMI input 
association. For example you might want the HDMI input #3 to be selected when you select the 
P 7’s 

In 9/Multi 1

 input. In this case you would want the Zhd Input Assign to look like this: 

In 9/Multi 1:  Zhd3

•

  Press the VOL Up or VOL Down buttons to change HDMI input assignment in this order: 

 None 

→

 Zhd1 

→

 Zhd2 

→

 Zhd3 

→

 Zhd4 

→

 Zhd5 

→

 (back to None)

•

  Press the Enter button to change the P 7 input you wish to 

associate. Each press of the Enter button will step to the 
next P 7 input.

•

  After you fi nish, press the Exit Setup button to return to the 

main Setup menu.

Repeat the above procedure for each P 7 input you wish to 
associate with an HDMI input on the Zhd.

Note:

 For more information on the Parasound Zhd HDMI selector, 

Note:

Note:

please contact your dealer or visit 

www.parasound.com

.

Factory Reset 

Caution!

  This will permanently delete all your settings

permanently delete all your settings and custom input names and replaces 

them with the factory default settings.  
Press the Enter button to proceed into the Factory Reset conformation.

•

  When “Factory Reset?” appears on the P 7 display, press the 

Exit Setup button to exit the factory reset option and return to 
the main Setup menu. Press the Volume Up button to delete all 
of your settings

of your settings and restore the factory defaults.  

Note:

 If you press the Volume Up button to delete your settings 

Note:

Note:

you cannot recall them and you will have to repeat the entire 
setup process.