background image

3

Thank You for Choosing Parasound

Your new Parasound

®

 Halo P 7 preamplifi er is the pinnacle of analog audio technology and value 

engineering for a stereo or surround sound music system. We’ve endowed the P 7 with unique 
connectivity and control features which enable it to be the centerpiece of a high-end stereo or 
surround sound system.
We are proud to offer you this exceptionally versatile audio component, knowing that it will 
bring you many years of enjoyment and dependability.
We appreciate you taking the time to read these instructions and thank you for selecting 
Parasound. For updates and corrections to this manual, we invite you to check our web site, 

www.parasound.com

Enjoy.

The Parasound Staff

Keeping Records for Future Reference

Record the serial number located on the back panel or bottom of your P 7 in the space below. 
Also note your Parasound Dealer’s name and telephone number. Your purchase receipt/bill 
of sale is required to determine if your P 7 is eligible for Parasound warranty service. We 
recommend that you make an extra copy of your original purchase receipt/bill of sale and 
store it inside the P 7’s carton.

Important Warranty Information

There is no Parasound warranty for this unit if it was not purchased from an Authorized 
Parasound Dealer. Investigate warranty coverage statements made by an unauthorized dealer 
very carefully, as you will need to depend entirely upon your dealer, and NOT upon Parasound.
Unauthorized dealers lack the capability to make repairs or arrange for repairs of Parasound 
equipment. A list of Authorized Parasound Dealers and detailed warranty information is available 
at 

www.parasound.com

 or you can call 

www.parasound.com

www.parasound.com

(415) 397-7100

 between 8:30 am and 4 pm Pacific time.

A missing or altered serial number could indicate that this unit was re-sold by an unauthorized 
dealer or is stolen merchandise. If this unit is missing its serial number or the serial number has 
been altered, you should return it to your dealer immediately for a full refund.

INTRODUCTION

OWNERSHIP REFERENCE INFORMATION

Parasound P 7 Preamplifier Serial #: 

Parasound Dealer:

/

Dealer Phone Number:

Date of Purchase:

-

Summary of Contents for HALO P 7





























Reviews: