Parasound
®
Z Custom
™
Zpre3
Owner’s
Manual
Page 10
Remote Control
Off & On
These buttons turn power on and off.
Balance L & R
Use these buttons to shift the balance to the left or right. This can be
helpful to compensate for speaker placement or room acoustics. The
maximum adjustment is 15dB.
& -
The + and – buttons increase and decrease the volume level.
Mute
Press to mute the audio. Pressing a second time will unmute the audio.
The mute is also turned off automatically if you increase or decrease the
volume or if you power the unit off and back on again.
Mem
This button recalls the volume setting you have memorized. This is a
convenient way to jump to your favorite volume setting. See page 12 for
instructions on how to set the Mem volume level.
Inputs 1- 4/Aux
These buttons select the input you wish to hear.
BP (Bypass)
This button selects the Bypass input. The Bypass input is also automatically
selected when the unit is turned off. See page 7 for more information.
Tone Flat
This button resets the Treble and Bass settings to zero (flat).
Bass & Treble
Raise or lower the amount of bass and treble by using these buttons.
Dim
Press this button to select one of the display's two brightness levels.
Set / Vol Mem
The Set button is used in conjunction with other buttons for setting up some features.
These features include setting the turn on volume, Mem (favorite) volume and
renaming the inputs. See page 12 for instructions on how to use these features.
