Parasound
®
Z Custom
™
Zpre3
Owner’s
Manual
Page 12
Turn On Volume & Favorite Volume Settings
Turn On Volume
You may wish your Zpre3 to come on to the same volume setting every time it is turned on. This can be
particularly useful if you sometimes listen at high volume levels and you want to avoid a blast of sound the
next time you turn it on. Or you may have a preferred listening level. To set the Turn On volume setting
follow these steps:
Setting the Turn On Volume:
1) Adjust the volume to the level you wish to program
2) Press the “Set” button
3) Press the “On” button
Now every time the Zpre3 is turned on the volume will automatically be set to the level
you have programmed.
Cancel the Turn On Volume Feature (Use Last Volume)
You may wish to cancel the “Turn On Volume” feature. In this case, when the Zpre3 turns on the volume
will be at the same level as when it was turned off. Follow these steps to have the Zpre3 turn on to the level
it was last used at:
Cancel the Turn On Volume feature:
1) Press the “Set” button
2) Press the “Off” button
Now when the Zpre3 turns on the volume will be set to where it was last used.
Memorizing a Favorite Volume Level (Mem button)
For your convenience, you can memorize your favorite listening level. Once memorized you can easily
jump to this listening level by pressing the “Mem” button on the remote control.
Memorizing a favorite volume level:
1) Adjust the volume to the level you wish to be memorized
2) Press the “Set” button
3) Press the “Mem” button
You can now jump to your favorite listening level by pressing the Mem button at any time. This is
different than the “Turn On Volume” you may have already set.
