REMOTE CONTROL HANDSET continued
12
Mono Key
The Mono and Stereo (St.) keys have the same function as the Mono button on the front panel
Press the Mono key to enforce mono output for stations which are broadcasting stereo signals.
When you press the Mono key to manually select mono output, the display will show MONO-E.
E stands for Enforced. Press the Stereo (St.) key to restore automatic stereo-mono operation.
Mem (Memory) Key
The Ztuner v.2 can store up to 20 AM and 20 FM station presets. The Pre Max key on the
remote handset allows you to select the total number of presets you wish to use.
To store a preset station into memory:
1. Tune to the station you want to store in memory.
2. Press the Mem key; MEMORY will appear in the front panel display and the empty space will
flash. These indicate that the memory bank is open and you may enter a new station into memory.
3. Press numbered keys to select the desired preset number such as key 3 for Preset station
number 3, or press key 1 and then key 5 for Preset station number 15. Please note that if you
have set the maximum preset higher than 9, you must enter a zero before a single digit. For
instance, to set preset 3 you must press “0” then “3”.
Note
: After you press the Mem key you’ll have about 5 seconds to press the first numbered
key. If you don’t press any number keys in this time, no new preset station will be entered.
Pre Max (Preset Maximum) Key
This key enables you to restrict the total number of preset stations so you can find your
favorite stations more quickly when tuning the presets. To set the maximum number of preset
first press the Pre Max key and then a number between 1 and 20. AM and FM can have a
separate number of max presets so don’t forget to set both the AM and FM max presets.
Preset-Direct Keys 0 through 9
The numbered keys perform three functions.
Preset Station Selection
Press the numbered keys for direct access to each stored preset station.
Presets 1-9 are displayed as P 01, P 02, P 03, and so on (Preset max set to more than 9).
Presets 1-9 are displayed as P 1, P 2, P 3, and so on (Preset Max set fewer than 10)
To select station presets 10-20, press the tens place key first. For example, to select preset 20,
first press key 2, then press key 0.
Direct Frequency Tuning
The numbered keys can select the broadcast frequency of the station you wish to receive.
First press the Freq Tune (FT) key, then the numbered keys corresponding to the station.
To tune to station 103.7 press the Freq Tune (FT) key, then press keys 1, 0, 3, 7, 0.
To tune to station 88.5 press the Freq Tune (FT) key, then press keys 8, 8, 5, 0
Note
: If you enter an incomplete frequency, such as 1, 0, 3, 7 which is missing the final 0 ,
there will be a short pause while the Ztuner v.2 fills in the missing number and finds the station.
Summary of Contents for Ztuner v.2
Page 1: ......
