7
RESCUE GUARDIAN
–
Switch Functionality
Activity
Push button 1 (SELECT) Black
Push button 2 (ARM / DISARM) Red
Press Momentarily
Button 1 and Button 2
Power ON
Press and Hold 5 seconds
(Button 1 and Button 2
Simultaneous)
Power OFF
Press and Hold 5 seconds
Turn on/off Display Front Light
Load Alarm
SET & RESET*
Press Once Momentarily
When display ON: Toggle Between
Load Units and Incline
When Display OFF: Wake up Display
No Functionality
Self-Calibration on Start up
Install charged batteries and secure the battery compartment lid of the Rescue Guardian. Place
the Rescue Guardian on a Flat surface and depress both Pushbuttons quickly and simultaneously.
The Rescue Guardian will enter a
“self
-
calibration” mode so it is imperative to NOT to move the
unit for approximately 10 seconds as it powers up.
Threshold Settings
Definition
-
The point at which a sensor reading exceeds the minimum or maximum parameters
entered by the user triggering the Alarm Condition.
Load
(Selectable Units)
Incline Angle
(Degrees)
Vibration
(Hertz)
Pounds
Min 100 - Max 2300
Min 0.1
–
Max 15
1hz
–
100hz
Kilograms
Min 45 - Max 1043
Newtons
Min 444 - Max 10230
*Default ALARM Thresholds - 500lbs Load , 1.5 degrees Incline, 100Hz Vibration
–
these default
threshold settings are NOT user changeable.
DISPLAY
The Rescue Guardian utilizes a state-of-the-art 2.7 inch front lit display developed to be
readable in any lighting condition. Ultra-Low power consumption and high resolution coupled
a wide/symmetrical viewing angle ensure that all critical information is displayed legibly to the
user.
Summary of Contents for 22-796RG1
Page 7: ...6 RESCUE GUARDIAN...
Page 12: ...11...
