22
7
Hold the lines adjacent to the parachute, and fold them in a figure 8 shape using two
fingers, all the way to the main strap (the main strap should fold once into the figure 8
shape) and lock them together with a thin rubber band.
Do not fold the rubber band, it is supposed to be rather lose.
Placing the parachute inside the canister necessitates the folded parachute, the yellow cap,
the red base and a new pyro actuator:
8
Remove the used pyro-actuator from the socket in the bottom of canister.
9
Place a new Pyro-actuator in place according to the above mentioned
10
Place the red base into the bottom of the
canister.
11
Place all the lines at the bottom of the
canister on the red base, so that the folded
part of the main strap (figure 8 shape) is put
first on the red base and the rest of the lines
are placed above it. The rest of the main
strap should come out of the canister
opening.
12
Insert the parachute to the canister in
zigzag folds. Keep constant pressure on the
folds for the parachute to fit.
13
Do not remove your hand from the top of
the parachute. With your other hand,
connect the main strap to the bridles and
secure the carabiner. Fold the main strap
on top of the parachute so that the bridles
leave the canister, at one point on the
opposite side to the SAP, towards the front
of the drone and place the yellow cap.
Make sure the cap is secured and that the
parachute is not sticking out of the cap.
Fly Safely!
Should you have questions, contact our support team at –
Phone – +972-36885252
