SafeAir™ M-200 TerminateAir Update
3
www.parazero.com
2.
Replacing the batteries
1
In
order
to
replace
the
batteries, remove the quick
release pin, by pressing it first
against its spring to align the
plate. Turn the TerminateAir to
the left around its pivot. After
replacing the batteries turn the
TerminateAir back to its place,
insert the quick release pin,
while aligning its plate. Then
press the pin against its spring
and rotate the plate to the
horizontal position. This will
secure the pin in place.
2
Once a week, tighten the left
long screw using the provided
toolset.
Caution
Make sure that the lever is always
positioned in its lower position.
Fly Safely!
Should you have questions, contact our support team at –
support@parazero.com
Phone –
+972-36885252
Lever
Releasing knob
