SafeAir™ M-600 Installation Guide
4
www.parazero.com
1
Safety Instructions
Caution
Before you start the installation, read these safety instructions carefully!
Follow the instructions in this guide in the exact order in which they are presented, in order
to ensure your own safety as well as the safety of others.
Installation video
: A step by step video can be found here:
Make sure to follow the instructions relevant to your model.
The ParaZero SafeAir M-600 is a safety system designed to deploy almost instantaneously, by
using a special pyrotechnic mechanism, which must be handled with caution.
Figure 1 – SafeAir M-600 System
The system incorporates two safety elements –
A Safety Pin Error! Reference source not found.
The safety pin electrically prevents the activation of the system. The system is packed with
the safety pin connected to the system. Do not remove the safety pin until specifically
instructed to do so in this guide.
A Safety Cover
The safety cover physically prevents the deployment of the parachute, in case of an
unintended deployment. It is designed for safety during transportation, storage and for
applying at the end of each flight day. It is also highly recommended to put the cover
back on after each flight for added safety. The cover is also designed for protection
against external damage. The system is provided with the cover stretched over the
parachute canister.
Do not remove the safety cover until you complete the installation, and you are ready to
fly.
