SafeAir™ M-600 Installation Guide
5
www.parazero.com
2
Package Contents
The SafeAir M-600 package includes the parts shown in Figure 2.
Figure 2 – SafeAir M-600 Package Contents
Table 1 – SafeAir M200 Package Contents
#
Description
1
The main parachute system, including the parachute, a mounting plate including
the SmartAir, the electric wires, safety pin and safety cover. All are already
connected and ready to use
2
The TerminateAir M-600 with one cable connected to it.
3
Four mounting legs.
4
One indication buzzer with electric cable connected to it
5
One RC cable with two PWM connectors at the end.
(SafeAir M-600 model and SafeAir M-600 V2 model only)
6
Not applicable.
7
one M4 Screws for connection to the M-600 mounting plate (they replace
the existing screws) + a syringe with Loctite adhesive.
8
one M3 nylock nuts to connect the TerminateAir electric connection to the
bottom electric board
9
Pyro-dummy
(used only for troubleshooting purposes).
10
Six + one M3\8 screws and washers for physical connection of the
TerminateAir to the body of the M-600
11
Syringe with Loctite.
7A
9
12
