• Connect the power adapter to the
power cord socket on the com-
pressor and then plug it into a suit-
able socket.
3.3 Performing the inhalation
To avoid overheating the compressor, never place a cover over
the device during operation. If the compressor is covered, it
cannot be cooled properly.
• Before starting the treatment, pull the nebuliser out of the
holder.
• Start the compressor by pressing the on/off switch.
• Check that an aerosol is being generated before you start
with the inhalation.
WARNING
In the event of
damage to the device
a person may come
into contact with live parts, and there may be a
risk of elec-
tric shock
. Therefore, switch the compressor off and dis-
connect the power adapter from the mains socket immedi-
ately if the compressor, the power adapter or the power ad-
apter cable is damaged or if damage is suspected (e.g., fol-
lowing a fall or if there is a smell of burning plastic).
• Perform the inhalation as described in the instructions for
use of the nebuliser.
en
– 41 –
