42
eFlow
®
rapid
- 03/12
3
PREPARATION FOR INHALATION
Connection to the power
supply
The device can be operated with
rechargeable batteries, non-rechargeable
batteries or connected to the mains power
supply via the power adapter supplied.
Mains power operation
(100 V~ to 240 V~)
• Plug the connector of the power adapter
into the control unit:
• Plug the power plug on the power
adapter into the socket.
When the adapter is plugged into the
socket, the device is ready for use.
Changing the country-specific adapter:
• Disconnect the power adapter from the
socket.
• Push the interchangeable adapter
upwards from the bottom until it
detaches from the power adapter.
• Attach the country-specific adapter
(interchangeable adapter,
9a
) by insert-
ing and sliding it into place:
• Make sure that the adapter engages in
the power adapter housing.
Caution:
Follow the hygiene instructions and
ensure that the nebuliser handset is also
cleaned and disinfected before it is used
for the first time (see Chapter 5,
HYGIENIC REPROCESSING).
Caution:
- Only use the power adapter supplied.
- If the power adapter is damaged or
faulty, discontinue use immediately.
9a
Summary of Contents for eflowrapid 178G1005
