• Add the volume of medication prescribed by your
doctor into the lower section of the nebuliser
using the dosing cap (6) (max. level: 15 ml).
• Place the middle section of the nebuliser (1b) on
the lower section of the nebuliser (1c). Ensure
that the blue marks form a line.
• Turn the upper section of the nebuliser clockwise
as far as it will go until both components are firmly
connected.
• Fit the PARI SOLE N nebuliser onto the base
unit (9).
- 37 -
en
3.6 Attaching the accessories
... for inhalation with the mouthpiece
• Attach the mouthpiece (2) to the nebuliser.
...for inhalation with the nasal joining piece
• Attach the mouthpiece (2) to the nebuliser.
• Place the nasal joining piece (4) on the mouth-
piece.
...for inhalation with the mask
• Attach the mask (3) to the nebuliser.
CAUTION
You must make sure that the expiratory valve
plate on your mask is pressed out; this will pre-
vent the aerosol from mixing with the ambient
air during inhalation. Otherwise, the
effective-
ness
of inhalation might be
impaired
.
... for inhalation with the PARI TRACHEO SET
• Attach the PARI TRACHEO SET (5) to the
nebuliser.
Ensure that the tracheostoma mask is fitted the
right way round.
