22
1005DX SPEEDSTER
®
SWITCHES
“On” switches are located on the plate in front of the ma-
chine. To use vacuums, turn on Vac 1 and Vac 2 switches.
To use pump, turn on Pump switch. Bottom right switch
has no use.
1005DX SPEEDSTER
®
FILL SOLUTION TANK
1005DX SPEEDSTER
®
VAC/SOL
HOSE CONNECTIONS
Attach one end of a solution hose to a wand or other tool,
the other end to the Speedster’s® front quick disconnect.
Attach one end of a vacuum hose to the tool, the other end
to the Speedster’s® Cuff-Lynx™ vacuum hose port.
1005DX SPEEDSTER
1005DX SPEEDSTER
®
PRIME VALVE
& PRESSURE REGULATOR
Prime the pump by turning the valve to the Prime position
(as shown above) for 30 seconds, then turn right to the
Run position. Turn the Pressure Regulator to the left to
decrease water pressure. Turn the Pressure Regulator to
the right to increase water pressure.
PRESSURE
REGULATOR
HIGHER PSI
LOWER PSI
RUN POSITION
Lift lid and manually fill the solution tank or use the easy
faucet fill.
PRIME POSITION
