3
FAQs
Q – How much PSI do I need to operate the Spinner
®
?
$²6SLQQHUV
®
require between 500 and 3,000 PSI.
Troubleshooting
The Spinner
®
is not spinning.
1. Inspect the jets to make sure they are not clogged.
&KHFNWKHPDFKLQHIRUDQRUPDOÁRZRIVROXWLRQE\GLVFRQQHFWLQJWKH6ROXWLRQ
Hose from the Spinner
®
and letting the liquid run freely.
,IWKHVROXWLRQ·VÁRZLVGLVUXSWHGXVH0\WHH
®
System Maintainer 3601.
4. Try to spin the unit by hand. If it does not move, replace the swivel. If it moves, the
seal may need rebuilding. Take the Spinner
®
to your local service center.
Guidelines
)RUHDVHRIXVHNHHSWKHEUXVKDQGPDQLIROGEDODQFHGDQGÁDW
$GMXVWWKHKDQGOHDWDFRPIRUWDEOHKHLJKWIRUWKHRSHUDWRUPDNLQJVXUHWKHEUXVK
remains balanced before starting the extractor.
3. The Spinner
®
operates differently according to the surface. Smooth surfaces offer
more resistance than surfaces such as tile and grout. If you experience resistance of
PRYHPHQWDGMXVWWKHYDFXXPUHOHDVHVORWWRUHOHDVHDLUIURPWKRVH
Replacement Parts
8903, and 8904
%UXVK *OLGH.LW²1R$
*OLGH²1R3
%UXVK²1R*
6ZLYHO²1R+
5HEXLOG.LW²1R+
8908
*OLGH²1R3
%UXVK²1R*
6ZLYHO²1R+
5HEXLOG.LW²1R+
GENERAL INFORMATION