7
DHC-2 Beaver
www.
kmp
.c
a
DHC-2 Beaver
www.
kmp
.c
a
1. Remove the first nut off of motor shaft.
(Do not remove remaining washer and nut off shaft.)
2. Press the nut into front of propeller (front is side with writing)
3. Slowly spin propeller onto shaft, until snug with inner washer
(ensure propeller does not contact cowling.)
You may need to ream out the centre hole diameter to fit
propeller on shaft.
4. Attach white plastic spinner adapter to shaft
5. Attach chrome spinner to adapter with the provided screw