English
6 / 14
ATT140-340
- - -Main Menu - - -
START/STOP
USER SETTINGS
SERVICE
INFORMATION
From this page you can view system information and alarm history.
Select
SYSTEM INFO
and press
Enter
to confi rm:
- - - Informations Menu - - -
SYSTEM INFO
ALARMS HISTORICAL
Using
Up
and
Down
. You can view:
-
Information on cycles times;
’
-
Values input signals:
INPUTS
Pressure 1 (B6) : 04.2
Pressure 1 (B7) : 04.3
Level (B8) : NO WAT:
AD Inlet Temp (B9): 02.6
Thermal Mass (B10): 02.4
- Counter
2014/Gen/24 16.20.20
HOURS COUNTERS
UNIT_ON : 000001 (h)
COMPRESSOR : 000001 (h)
LAST OFF DAY : 00,00.00
S1
-
Information about software
SOFTWARE INFO
SW Release : 10
SW date: 2014/01/20
Bios : 5.00. 20/May/01
Boot : 4.00. 20/May/01
-
Information about bypass
BYPASS
BYPASS STATUS : OFF
OPEN L.SWITCH: Closed
CLOSE L.SWITCH : Open
5.4 Energy saving
5.4.1 ENERGY SAVING ( kWh)
The user can see how the unit is saving in kWh, compared with a similar
machine to be chosen from:
- Heatless
- Heat
Regenerated
- Blower
press the key DOWN one time
on the main menu.
This Screen appears:
ENERGY SAVING
0000073.1
KWh
5.4.2 ENERGY SAVING (money)
The user can see how the unit is saving in “money”.
Press the key DOWN two time
on the main menu.
This Screen appears:
ENERGY SAVING
000000009€
Steps to enable these functions:
1. Press
PRG
than
USER
than
SETTINGS
than
OTHER
.
This Screen appears:
U12 - BACKLIGHT ON: NO
U13 - Enable Money : NO
U14 - Money : Euro
U15 - Money / KWh : 0.120
U16 - Saving Compared
to Heatless
U2
2. Parameter
U12- Enable Money
: to enable the energy saving with
money change in
YES
and press enter to confi rm.
3. Parameter
U13- Money
: choose the money symbol:
Symbols available:
Parameter
Description
Simbol
Euro
euro
USA Dollar
U.S. dollar
ENG Pound
English pound
JAP Yen
Japanese yen
SCAN Krone
Krone
RUS Rublo
rublo
4. Parameter
U14- Money/KWh
: conversion factor for the calculation
of the currency. On default “0.12” between euro and KWh.
5. Parameter
U15- Saving Compared to
: permit the selection of the
machine is comparable, chose between Heatless, Heat Regenerated,
Blower.
NOTE: The symbol
appears only when the units is in
ON
.
5.5 Alarms and warnings
• Alarms have the effect of turning off the refrigeration circuit (the
dryer is never completely blocked).
• The warnings only give an signal.
• In case of alarms or warnings contact the supplier.
• The alarm list is on see par. 7.
5.5.1 ALARM AND WARNINGS
In case of alarms:
1. The
key became red.
2. on display press the key
. Appears the alarm code “fl ashing”.
Press the key “
” to reset the alarm (only after the disappearance of
the alarm condition).
Summary of Contents for ATT140
