Declaration of Conformity
Parker Hannifin Manufacturing Germany GmbH & Co. KG
Hiross Zander Division
Im Teelbruch 118
D – 45219 Essen Kettwig
hereby declares with sole responsibility, that the products
high pressure dryer
series HDK-MT 4/100 to 70/350
assembly type: assembly acc. to Art. 3 No. 2.2,
which this declaration refers to, conform to Directive
97/23/EG
and were
subjected to a conformity assessment according to Annex III Modules B+D
(for assembly assessment).
For the assembly, the EG type approval certificate DTM0506108 by Lloyd’s
Register Quality Assurance GmbH, Hamburg, is available.
The quality assurance system is monitored by the service provider stated below
Lloyd’s Register Quality Assurance GmbH (identification number 0525)
Am Sandtorkai 41, D - 20457 Hamburg.
The assembly consists of pressure appliances according to the classification list
(attached to the technical documentation provided by the manufacturer).
The following standards / technical specifications were used:
harmonized standards: DIN EN ISO 12100:2010, DIN EN 60204,
DIN EN 61000-6-3, DIN EN 61000-6-4
The following other EG directives were used:
2004/108/EG
2006/95/EG
Essen
,
19.08.2014
Datum / Date
i. V. Dr. Jürgen Timmler
Leiter Technik und Entwicklung /
Manager Engineering and Development